At the pinnacle of aerial cinematography, DJI Inspire 3 delivers unprecedented efficiency in workflow, camera language, and creative freedom. This multi-functional 8K camera drone enables professional-level filmmakers to maximize the potential of any shot and master the unknown.

Inspire 3 is a professional camera drone that adopts a new fluid design that uses aerodynamics to reduce air resistance. Powerful maneuverability allows for responsive and precise control, with flight time increased up to 28 minutes.

• Repeatable Routes: The aircraft will automatically fly the same route and maintain all preset parameters such as altitude, speed, gimbal angle, and camera settings.

• Dolly 3D: Dolly 3D can simulate a crane, cablecam or dolly on film sets, while greatly overcoming the limitations of these devices.

• 1/1.8-inch Ultra-Wide Night-Vision FPV Camera

• Centimeter-Level RTK Positioning and Waypoint Pro

• O3 Pro Video Transmission with Dual-Control

The Inspire 3 comes with the Magnificent Zenmuse X9 Air, 35mm Full-frame, 8K Raw CMOS sensor camera with a 3x axis stabilised gimbal & 4x prime lens options:

• Full-frame 8K/75fps ProRes RAW

• Full-frame 8K/25fps CinemaDNG

• Dual Native ISO, 800 & 4000

• 80° Tilt Boost or 360° Pan Dual Configurations

• High Dynamic Range of 14+ Stops

• DL-Mount Lens Selection

• DL-S 18mm F2.8 lens

• DL 24mm F2.8 lens

• DL 35mm F2.8 lens

• DL 50mm F2.8 lens

Max Hovering Time: Approx. 25 min

Max Flight Time: Approx. 28 min

When booking our Inspire 3 you will receive:

Highly experienced two-man team consisting of a Pilot & Camera operator. (A third crew member can be added if the shot requires a dedicated focus puller at an additional charge)

• Licensed & Insured Inspire 3 aircraft

• Public Liability cover of USD $5,000,000

• Zenmuse X9 Air full frame 35mm 8K RAW camera

• DL-S 18mm F2.8 lens

• DL 24mm F2.8 lens

• DL 35mm F2.8 lens

• DL 50mm F2.8 lens

• Full ND filter set

• 2x 1TB SSD cards

• 8x Sets TB51 batteries

• Battery Charging station

• Flight planning per location

• Aerial Support vehicle

• Generator

The Inspire 3 has the option to allow the camera operator or DP to control the camera gimbal via 3x Axis Nodo wheels paired with the DJI transmission system if preferred over remote joystick controller.

Optional Extras:

• Ignite Digi Can Buster

• Nodo 3-Axis Wheels

• DJI Transmission System

• DJI RTK ground station (Only required if repeatable routes or 3D Dolly flights needed)